群发资讯网

返回主页
cross connection
交叉连接:指两个不同系统、设备或网络之间的连接
常用释义
英式发音
美式发音
基本释义
  • 交叉连接:指两个不同系统、设备或网络之间的连接,可能导致数据传输错误或安全风险。
例句
  • 1·The cross connection point of the round steel should weld fastness.
    圆钢的交叉连接触应焊接牢固。
  • 2·Because of this cross connection, the DTR output line can be used for simple flow control.
    因为这种交叉连接,DTR输出线可以被用来简单的流量控制。
  • 3·It is used in routing switch wavelength choice optical cross connection natural repair protection and so on.
    光开关可实现在全光层的路由选择、波长选择、光交叉连接以及自愈保护等功能。
  • 4·We introduce a general model for the calculation of the optical signal to noise ratio (SNR) of the optical cross connection (OXC) in optical networks in this paper.
    文章给出了计算OXC级联信噪比的一般解析模型,并针对“信号功率均衡”和“总功率均衡”两种方案进行了研究,分析了在这两种特定情况下系统的信噪比特性。
  • 5·For consistency reasons, it is thus very desirable to mandate the connection paths by setting up the target connection requirements to prevent cross connection as described below.
    出于一致性的原因,非常需要按照如下所示建立防止交叉连接模式的目标连接需求,从而形成强制的连接路径。
  • 6·Optical switch is chiefly used in OXC (optical Cross Connection) system in optical network. It can fulfill many functions such as routing, selecting optical wavelength and OXC etc.
    它主要用于光网络的光交叉(OXC)节点系统中,用来实现全光层次的路由选择、波长选择、光交叉连接等功能。
  • 7·An inspection of the plant revealed that a cross connection in the pipes carrying the milk allowed mingling of raw milk with pasteurized milk when certain valves were incorrectly closed.
    一项关于工厂的检验报告在输送牛奶管道的十字联结处,当某些阀门被不正确关闭时,使生牛奶和杀菌消毒过的牛奶混合。
  • 8·Through precise timing analyzing and calculation, this system chose high-speed CPLD to implement the cross connection between the chips, achieved the harmonious operation of the different parts.
    通过时序分析和计算,选用高速CPLD完成芯片间互联,实现了系统各部分的协调工作。
  • 9·As a key device for the realization of WDM-based all-optical network, OXC (optical cross connection) device is plagued with severe crosstalk problem caused by the interaction of its signal and link.
    光交叉连接器件(OXC)是实现WDM全光网络的关键器件,但由于其自身的链路和信号相互作用,会产生严重的串扰问题,从而限制了OXC性能的充分发挥。
  • 10·With a null modem connection, the transmit and receive lines are cross-linked.
    使用零调制解调器连接时,发送线和接收线要交叉连接。