群发资讯网
← 返回主页
laminates
分层
常用释义
英式发音
美式发音
基本释义
  • n. 叠层组合材；层压制品（laminate 的复数）
  • v. 分层，分成薄片（laminate 的第三人称单数）
例句
  • 1·These thicker laminates are more difficult to infuse and the exotherm development of traditional epoxy systems can lead to exotherm wrinkles in spar caps.
    但这些较厚的层压板不易进行灌注，同时，由于传统环氧系统的固化放热还会导致在主梁生产过程中产生起皱等品质缺陷。
  • 2·In this paper, the manufacture process, the mechanical and delamination properties of several kinds of fiber reinforced aluminium laminates have been studied.
    本文初步探索了几种纤维增强铝合金胶接层板的成型工艺，并评定了这些层板的力学性能和抗分层性能。
  • 3·The need to characterize damage resistance and damage tolerance behaviour of composite laminates was proposed by the design requirements and usage experience.
    复合材料结构的设计要求和使用经验提出了复合材料体系损伤阻抗和损伤容限性能表征的需求。
  • 4·The formula for calculating the elastic constants of the composites laminates is derived in this paper. The calculating results agree with the experimental values.
    本文推导了计算多向复合材料层板弹性模量的公式，计算结果与实验结果符合得很好。
  • 5·The representative testing results of laminates show that the equipment is effective and the testing method is a promising attempt, which can be used for reference.
    对层板复合材料试验结果的分析表明，设计的测试装置有效，建立的测试方法是对层板复合材料断裂韧性测试的有益尝试，有较大的参考价值。
  • 6·Also, no delaminations were found in tensile and cyclic tests at elevated temperature. That significantly shows a nearly perfect bonding in hybrid laminates is made.
    并且高温下之拉伸与疲劳试验下皆无脱层，明显的展现了优良的混和积层板已制作完成。
  • 7·Predicting residual compression strength of composite laminates with delamination is a very important research subject for Engineering composite structure designers.
    准确预测含分层损伤层合板的剩余压缩强度，对复合材料具有十分重要的意义。
  • 8·The effects of stitching technical parameters such as the stitch thread diameter, stitch step and stitch space on the stitched composite laminates are also analyzed.
    研究了缝纫参数(包括缝纫线直径，缝纫针距和行距)对缝纫复合材料层合板屈曲强度的影响。
  • 9·Since the isotropy of such laminates holds only for the elastic properties but not for the strength behavior their strength largely depends on the stacking structure.
    在板内发生损伤之后，其各向同性性质不再保留，最终强度将依赖于加载方向以及叠层顺序。
  • 10·In addition, by combining the interleaving and surface bonded PZT ceramics, joint effect of both methods has been achieved for the vibration damping of CFRP laminates.
    另外，将插层和表面粘结压电陶瓷方法结合并用，会收到综合的CFRP振动阻尼效果。
网络释义