yield strength
屈服强度：在受到应变时
常用释义
英式发音
美式发音
基本释义
- 屈服强度：在受到应变时，物体发生一定程度变形的应力。一般以0.1%或0.2%的变形量为标准来衡量。
例句
-
1·Good yield strength and tensile strength.良好的屈服强度和抗拉强度。
-
2·The statistic relation between yield strength and temperature is obtained.并给出了屈服强度与温度之间的统计关系。
-
3·Q - the first letter of Chinese phonetic alphabet. 245 yield strength value.Q—“屈”汉语拼音首位字母。245—屈服强度值。
-
4·Yield strength elongation-strain corresponding to yield strength of material.屈服强度伸长—对应于材料屈服强度的应变。
-
5·The aim is to obtain a high yield strength, elastic limit and high toughness.其目的是获得高的屈服强度，弹性极限和较高的韧性。
-
6·The yield strength and elastic modulus will decrease with the temperature increased.温度升高，原子热运动加强，屈服强度和弹性模量降低。
-
7·The longitudinal yield strength and the Young′s modulus increase with the draw ratio.纵向屈服强度和模量随拉伸比增加而提高。
-
8·It was obtained that the yield strength was increased as the strain rates were raised.在讨论应变率变化时，获得了屈服强度随应变率增大而增高的结果。
-
9·When the pre-strain surpasses 0.95%, the reverse yield strength reaches to a constant.当预应变超过0.95%时，反向屈服强度达到恒量。
-
10·Fatigue strength is less than static stress strength such as elasticity limit, yield strength.疲劳强度低于弹性极限或屈服强度等静应力强度。