thermal isolation
绝热
常用释义
英式发音
美式发音
基本释义
- 热隔离：一种防止热量传递的技术，通常用于建筑、设备或其他系统中，以减少能量损失和提高能效。
例句
-
1·The influence of the thermal isolation of the PS on resistance's sensitivity of VOx film was investigated.并在其表面沉积了氧化钒热敏薄膜，研究了多孔硅样品的热绝缘性能对氧化钒热敏薄膜阻温特性的影响。
-
2·The sensor (10) also includes a cavity formed under the diaphragm layer (16) and is configured to provide thermal isolation of the heating element.传感器（10）还包括形成于隔膜层（16）下面 的空腔，并配置成提供加热元件的隔热。
-
3·Porous silicon has been used broadly in the fields of micro-sensors because of its special thermal isolation performance and advantages in technology.多孔硅由于其热绝缘特性以及技术优势，已经在微传感器领域得到广泛的应用。
-
4·Instead of surface sacrificial layer and bulk micromachining technique, using polymer as thermal isolation material decreases cost and improves yield.以聚合物材料作为绝热材料，避免了表面牺牲层工艺和体加工技术，降低了成本、提高了成品率。
-
5·This paper describes the classical mathematic model of bolometer, the effect of thermal isolation and noise on detector performance are also discussed.总结了非制冷测辐射热计的经典数学模型，并分析了探测器热绝缘结构和噪声对性能的影响，指出了性能改进和优化的基本途径。
-
6·Analysis of the simulation result attests that the thermal isolation structure is important in the design of a bolometer detector thus endorsing the present work.仿真结果分析证明了热绝缘结构在探测器设计中是占有重要地位的，同时说明本文所做工作是有意义的。
-
7·This paper put forward application modes, cautions, and the effect of use of vacuum thermal isolation plate in refrigerator. The prospect of vacuum thermal isolation plate was described.指出了真空隔热板在电冰箱隔热保温中的应用方式、注意事项及使用效果，展望了真空隔热板的应用前景。
-
8·This article intorduces briefly a new kind of composite which has a lot of advantages such as wear-resistance, thermal isolation, corrosion resistance, high strength, and light weight, etc.新型复合材料具备耐磨损、隔温、防腐蚀、强度高、重量轻等多种优点，是现代交通工具上应用的理想材料。
-
9·In addition to controlling mechanical shaft and bearing loads, the coupling further protects the encoder by providing a high degree of electrical and thermal isolation between coupled shafts.除了控制的机械轴和轴承载荷，耦合进一步保护通过提供电力和热轴之间的耦合隔离高度编码器。
-
10·The support straps system of spaceborne radiant coolers requires thermal isolation and it requires to remain high stiffness and strength in order to ensure the radiant coolers structural integrity.星载辐射制冷器的级间支撑，即要隔热，又要求保持一定的刚度和强度，保证辐冷器结构的完整性。