test specimens

测试样本：用于进行实验或测试的样本或标本。

常用释义

测试样本：用于进行实验或测试的样本或标本。

扩展信息

检验试片

材料科学专业英语词汇... ... test rate 产生一个步骤测试数据所需要的时间 test specimens 检验试片 test station 测试站 ...

例句

Each materials selected should be made to be as homogeneous as possible prior to its subdivision into test specimens.

1 每个材料的选定，应作出那样均匀，尽可能之前，其细分到测试标本。

For test specimens taken from the component, the total thickness of the paint coating must be recorded and indicated in the test report.

对于从组成中提取的测试样品，涂料覆膜的总厚度须记录并在报告中指明。

For test specimens produced in a laboratory, the thickness of each paint coating layer must be recorded and indicated in the test report.

在试验室内制作的测试样品，每一片的厚度须记载并在测试报告中指明。

A portion of material taken to represent the lot sample, or the original material, and used in the laboratory as a source of test specimens.

部分材料将作为批样或原始材料，且用于实验用试样的来源。

CONCRETE. DETERMINATION OF THE DIMENSIONAL VARIATIONS BETWEEN TWO OPPOSITE FACES OF HARDENED CONCRETE TEST SPECIMENS.

混凝土 .水硬性混凝土试样两个相对面之间尺寸变化的测定

It was found that all the impact test specimens cracked along the parent metal of TC4 alloy after impact test.

对焊后试件进行冲击试验研究，冲击试件基本沿母材断裂。

Plastics - Compression moulding test specimens of thermoplastic materials.

塑料 .热塑材料的压塑试样

Plastics. Compression moulding of test specimens of thermosetting materials.

塑料 .热固性材料试样的压缩模制

screw driver for screws with internal serration - screw driver points , gauges and test specimens for torque testing.

螺钉和螺母的装配工具。十字头套筒扳手。尺寸和扭矩试验。

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.

塑料 .热塑材料试样的注塑法 .第 4 部分：模塑收缩率的测定

The test specimens of phase change thermal storage were designed and the cooling tests of phase change thermal storage were conducted.

设计了相变储热器的实验件和实验方案，进行了储热器的冷却实验。

Concretes. Study, suitability and control tests. Manufacture and storage of test specimens.

混凝土 .适用性和检验研究试验 .试样制备和保管

Concretes. Information tests. Manufacture and storage of test specimens.

混凝土 .信息试验 .试样制备和保管

AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN CORROSION RESISTING STEEL.

航空航天系列 .涂料和清漆 .不锈钢试件表面的性质和准备方法

CONCRETES. MOULDS FOR CYLINDRICAL AND PRISMATIC TEST SPECIMENS.

混凝土 .圆柱形和三棱形样模

The fracture features of Charpy impact test specimens of welded metal are also analyzed.

文中还对焊缝夏比冲击试样的断裂特性进行了探讨。

Other procedures for preparation of test specimens may be used if agreed upon by all interested parties.

若有关各方一致通过，也可采用其它方法来制备试样。

This practice also covers the preparation of test specimens, and the evaluation of test results.

本标准还包括试验样品的制备及试验结果的评价。

Store the test specimens without liquid, dry, overnight.

放置无盐水的样品，干燥，过夜。

Testing hardened concrete - Part 3 : compressive strength of test specimens.

硬化混凝土试验 .第3 部分：试样的压缩强度

To assist physicians in a variety of therapeutic work, is responsible for collecting all kinds of test specimens.

协助医师进行各种治疗工作，负责采集各种检验标本。

Testing hardened concrete - Part 5 : flexural strength of test specimens.

硬化混凝土试验 .第5 部分：试样的弯曲强度

Testing hardened concrete - Part 1 : shape, dimensions and other requirements for test specimens and moulds.

硬化混凝土试验 .第1 部分：样品和模型的形状、尺寸和其它要求

Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.

热塑性半成品焊接接头的试验 .第7 部分：腰形试验样品的抗拉试验

Wash the test specimens in dish detergent solution.

用洗涤剂清洗测试样品。

Two kinds of adiabatic shear bands were found in the post-test specimens impacted by spherical bullet and Hopkinson pressure Bar.

结果发现，该合金在两种试验条件下形成两种绝热剪切带。

Provide between 5 and 10 test specimens for the test.

对于该测试，要提供 5~10 个样本。

同义词

试样

sample bar test sample

更新时间：2025-06-21 03:24