temperature interval
[物] 温度间距
常用释义
英式发音
美式发音
基本释义
- [物] 温度间距，温度间隔；温度范围
例句
-
1·A concept of equilibrium temperature interval is used to estimate kinetic attributes of reactions.引入平衡温距的概念来估计反应的动力学属性。
-
2·The results showed that the solid liquid phase zone, temperature interval and segregation degree may be obviously enlarged with increasing s content so as to reduce the hot plasticity of the alloy.结果表明，随着S含量的增加，导致固液两相区、温度范围和偏析程度明显加大，引起合金的热塑性降低。
-
3·The interval of the coating time is determined by the temperature at the time of construction and the degree of curing of the film (by hand).重涂时间的间隔，由施工时的温度和涂膜固化的程度（以手触不粘）来确定。
-
4·With the steel line and the solid phase of the high and low liquidus temperature and crystallization temperature of the size of interval.它们与钢的固相线和液相线温度的高低及结晶温度区间的大小有关。
-
5·Function description: quicken the cooling of rubber mould; shorten the interval time of using the mould (increase the output); reduce the high-temperature bearing time (lengthen the service life).功能描述：加快橡胶模具的冷却、减少模具再次使用的间隔时间(提高产量)、减少高温承受时间(使用寿命更长)。
-
6·The Interval load Method was adopted to study the relation between the molecular motion of amorphous PMMA and temperature.采用间歇加力试验法研究非晶聚合物材料pmma的分子运动-温度关系。
-
7·The effect of quenching temperature, the interval time from quenching to aging and aging institution to 2A70 aluminium alloy pre-stretching plate structure and properties are introduced.介绍了固溶处理温度、淬火到时效间隔时间及时效制度等对2A70铝合金预拉伸厚板组织和性能的影响；
-
8·Effects of hormone dosage, interval time of hormone injection, oestrus period, season and temperature influenced on mouse superovulation were studied in this experiment.分析了激素剂量、激素注射间隔时间、发情周期、季节和温度对小鼠超排效果的影响。
-
9·Measures of crevices preventing such as the control of temperature and interval of expansion joint are given forth.提出了温度控制与伸缩缝最大间距控制等防止引起裂缝的措施。
-
10·According to the feature of SLS, the parameters of interest are layer thickness, hatch spacing, laser power, scan speed, work surroundings temperature, interval time and scanning mode.根据SLS加工工艺的特点，研究的工艺参数包括：层厚、扫描间距、激光功率、扫描速度、环境温度、层与层之间的加工时间间隔和扫描方式。