taper angle
形成一种锥形。
常用释义
英式发音
美式发音
基本释义
- 锥度角：两条直线或轴线之间的夹角，这两条直线或轴线在某一点处相交，其中一条直线或轴线逐渐变细或变窄，形成一种锥形。
例句
-
1·Pull the tip of the movable set so that the negative taper angle of the grinding easier.活动式拉梢之设置使负推拔角之研磨更为方便。
-
2·This method is recommended for taper turning of external and internal surfaces when the taper Angle is relatively large.当锥角相对较大时切削外锥面和内锥面推荐使用这种方法。
-
3·To make sure I got the taper Angle right, I would check by putting the rotary rasp behind the tip so I could just see the edges of it.确认我的尖鹿角是正确的，我将通过把转动锉刀放在顶端后来检查它的边缘。
-
4·At present, the ring rolling technology roll one ring in one process, and the technology can't deal with stress focus on the sharp taper Angle of mandrel roller.目前锥形套圈辗扩技术只能一次成形一件，而且由于锥形套圈锥角使得芯辊应力集中严重。
-
5·For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative taper Angle of cutters.该机可用于磨削各类形似半圆角或反锥角的高速钢和硬质合金雕刻刀具和单边或多边刀具。
-
6·To avoid sliding that occurs in cylindrical roller thrust bearings, the taper Angle of the rollers is selected so the extended contact lines intersect on the bearing axis.为了避免推力圆柱滚子轴承发生滑动，滚子的锥度要合适以至于扩大的接触线可以与轴承轴相交。
-
7·The bearing contact Angle and the roller half taper Angle are two important parameters of a large taper conical roller bearing, they influence the load and life of the bearing.轴承接触角和滚子半圆锥角是影响轴承载荷和使用寿命的两个重要参数。
-
8·The enhancement factor strongly depends on the illumination spot size, taper Angle of the probe, and the metal film thickness. The tolerance of the alignment Angle is investigated.研究发现电场增强跟入射光斑大小，探针的锥形角，以及金属膜厚度密切相关。
-
9·By arranging the head part of the common magnetizer to be in a taper Angle shape, the clearance distance can be shortened, and the effective use length of the iron core is extended.本发明将普通导磁体的头部设置成锥角形后，可缩短间隙的距离，延长铁芯有效使用的长度。
-
10·TAPER: any surface of any bearing part that is not the correct Angle or not to print.锥度：任何轴承部件的表面角度不正确或者不符合图纸要求。