strain hardening
工作硬化：通过塑性变形来增强金属或聚合物的强度。
常用释义
英式发音
美式发音
基本释义
- 工作硬化：通过塑性变形来增强金属或聚合物的强度。
例句
-
1·The steel reinforcement is represented by a bilinear strain hardening model.钢筋以双线性应变硬化模型表示。
-
2·The model includes the effect of strain rate sensitivity, strain softening and strain hardening.该模型包括了应变率敏感性效应，应变软化效应和应变硬化效应。
-
3·Thirdly, plastic strain ratio and strain hardening index are the two key parameters of material's formability.塑性应变比与应变硬化指数是评价板料成形性能的两个重要参数。
-
4·The results show that the stress-strain relationship of geotextile-reinforced fillings is of strain hardening.试验表明：加筋填料的应力–应变关系表现为应变硬化型；
-
5·When it accumulated to a higher degree, the specimen began to shear and dilate after a short time of strain hardening.达到一定程度后，岩石表现出短暂的应变硬化，岩石开始剪胀。
-
6·The PP with high grafting rate can improve the melt strength and the extensional viscosity of a PP system and the strain hardening.接枝率高的PP，可提高PP体系的熔体强度和拉伸黏度及其应变硬化。
-
7·Due to the effect of strain hardening, higher amount of cold deformation resulted in superior room temperature strength and inferior torsion ductility.由于加工硬化效应的影响，随着冷拔变形量的增加，合金丝材的室温强度增加，扭转塑性下降。
-
8·As a general one, the presented solution can represent not only the Linear-elastic response but also the plastic strain hardening of an actual material.本文解作为一般解，既能反映材料的弹性变形，也能计入材料的塑性应变强化。
-
9·The wear resistance of wheel steels is not affected by strain hardening under rolling/sliding conditions, while it is dominated by the pre-hardness of wheel steels.滚滑条件下，车轮材料应变硬化程度的高低不影响车轮材料的抗磨损性能，试验前车轮材料初始硬度的高低是决定其抗磨损性能的主要因素。
-
10·Meanwhile, strain hardening capacity of FSW joint in cooling water also enhances, and the tensile fracture presents the characteristic of microporous polymeric fracture.接头的应变硬化能力增强，拉伸断口呈现出微孔聚合型断裂特征。