群发资讯网

返回主页
state parameter
状态参数
常用释义
英式发音
美式发音
基本释义
  • 状态参数,[热] 态参量;热力学态函数
例句
  • 1·Note that adding the state parameter enables you to filter the policies for a given state.
    请注意,添加state参数后能够过滤给定状态。
  • 2·Vibration signal and state parameter are usually selected as the monitored signals to equipment diagnosis.
    利用振动信号或状态量对设备进行诊断,是设备故障诊断中最有效、最常用的方法。
  • 3·Under a definite gas state parameter and environment condition, the measurement deviation was correlated with the sampling time and the flow rate.
    并得出在采样气体状态参数和环境条件一定时,除尘效率的测定误差主要取决于取样时间及流量。
  • 4·Burn-through Point (BTP) is the most important heat state parameter in sintering process, and a sign to determine whether the process is normal or not.
    烧结终点是烧结过程中最重要的热状态参数,是判断烧结过程正常与否的标志之一。
  • 5·By taking common bend pipe in the project as an example, and using computational fluid dynamics (CFD) technology, the fluid state parameter was studied.
    以工程中常见的弯管为例,应用计算流体力学(CFD)技术,研究管中的流体状态参数。
  • 6·The factors affecting the maximum entropy distribution are average wave height and state parameter, and different sea states correspond different state parameters.
    影响最大熵分布的因子是平均波高和状态参量,不同海况对应的状态参量是不同的。
  • 7·The supercritical fluid is very sensitive to alternation of state parameter. The bigger change of fluid nature is caused by the smaller change of temperature and pressure.
    超临界流体对状态参数的改变十分敏感, 温度和压力较小的变化就会使流体的性质发生较大的改变。
  • 8·The state parameter detection circuit can detect the temperature, conductivity of the circulating water and the frequency of high-frequency signals. Then display them on the LCD Screen.
    状态参数检测电路对循环水的温度、电导率和高频信号的频率进行实时检测,并通过液晶屏显示。
  • 9·Furthermore, the software based on the modeling algorithm can be embedded into fermentation process control system, realizes fermentation process online modeling and state parameter online estimating.
    此外,利用该算法编制的软件可以内嵌到发酵过程监控系统中,实现发酵过程在线建模与状态参量的在线预估。
  • 10·One is not checking the parameters coming in, even though you know at this point that a parameter in a certain state will cause an exception in your method.
    第一,没有检查输入的参数,即使知道处于某些状态的参数会造成方法出现异常。
同义词