spiral wound gasket
螺旋缠绕垫片：一种用于密封管道、阀门和容器连接处的垫片。它由金属带和填料交替缠绕而成
常用释义
英式发音
美式发音
基本释义
- 螺旋缠绕垫片：一种用于密封管道、阀门和容器连接处的垫片。它由金属带和填料交替缠绕而成，具有良好的密封性能和耐压能力。
例句
-
1·Valves in these classes are also available with spiral wound gasket bonnet joints when specified.如果需要，这种压力等级的阀门也可配置螺旋盘绕或环连接垫圈。
-
2·Meanwhile the performance of graphite spiral wound gasket under different technique parameters was analysed.同时对不同工艺参数下的石墨缠绕垫片性能进行分析。
-
3·In such cases, can switch to spiral wound gasket, "o" ring and so on, are now a number of factories he already adopted.遇到这种情况，可改用缠绕垫片，“O”形环等，现在许多厂已采用。
-
4·The seal principle and its constriction of H-type complex gasket were introduced, as compared with wave-toothed compound gasket and spiral wound gasket.介绍了H型复合垫片的密封机理和结构，并且与波齿垫片和缠绕垫片的密封性能进行了比较。
-
5·The sealing design criteria to measure the factors of spiral wound gasket were adopted, based on this bolt loads of flange can be determined by using the new PVRC method.采用密封设计准则，通过试验确定了金属缠绕式垫片的垫片系数，在此基础上，按照PVRC新方法对法兰螺栓载荷进行了计算。
-
6·The design of gasketed joints is critical for low-emission applications. For better control and elimination of unwinding of spiral wound gaskets, a fully-enclosed gasket cavity is desirable.对于低污染排放应用来说，垫圈连接设计是关键性的。为了更好的控制和防止螺旋式垫圈的退绕作用，需要配置完全包装的垫圈腔。
-
7·TD-SW700Spiral-Wound gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded.SW700金属缠绕垫片由V形或W形不锈钢带和非金属填充料叠合，螺旋卷绕，始末端点焊而成。
-
8·Class 300-600: Fully-encased spiral wound graphite-filled stainless steel gasket.600磅级：全封闭螺旋缠绕石墨填充不锈钢密封垫。