solidification cracking
硬化裂纹
常用释义
英式发音
美式发音
基本释义
- 硬化裂纹
例句
-
1·As a result, a 2-d temperature field model for welding solidification cracking was developed.在此基础上，建立了二维焊接凝固裂纹温度场计算模型。
-
2·It was found that the solidification cracking susceptibility of weld metal increases remarkably as nickel content increases.结果表明：随着焊缝中含镍量的增加，焊缝金属的凝固裂纹敏感性增大。
-
3·In this paper, the temperature field of weld metal solidification cracking in the stainless steel was analyzed and simulated.进行了不锈钢焊接凝固裂纹温度场分析与数值模拟。
-
4·Analysis shows that the solidification cracking was always formed and developed along film-like sulphides at columnar grain boundaries.分析认为，凝固裂纹是沿偏聚在柱状晶晶界的低熔点膜状硫化物形成并扩展的。
-
5·Some plastic regions could be found and some dimples had been observed on the fracture surfaces of the solidification cracking of austenitic-ferritic weld metals.少量铁素体的焊缝凝固裂纹断口上有许多小塑性区，有明显的韧窝。
-
6·Heater leak occurs by direct reason of the stress corrosion cracking, while by other reasons of solidification cracking, small fusion depth of welding joint and non...应力腐蚀裂纹是造成加热器泄漏的直接原因，结晶裂纹、焊缝熔深小及坡口底部未熔透也是加热器泄漏的原因。
-
7·The mechanical fiber reinforcement in Solidification or in the drying process can be reduced to prevent cracking.在凝固或干燥过程中产生的机械能被纤维筋减弱，防止龟裂。
-
8·Directional solidification could improve hot rolling formability of magnesium ingot effectively. The total deformation could reach 94% without cracking when hot rolling was held at 673k.定向凝固工艺可有效提高镁合金铸锭的热轧成形能力，在轧制温度为673k的条件下进行热轧，总变形量可达94%以上而不出现裂纹。