1·Is the cable long enough to reach the socket?
电线够得着插座吗？
—— 《牛津词典》
2·Plug your tabletop lamp into a dimmer instead of the wall socket.
直接把你的台灯插到调光器上，而不用插到墙上的插座里。
3·Our spirit has access to this world through the mind in the same way that we plug into the phone socket to get internet access.
我们的精神以同样的方式经由我们的意识进入到这个世界，我们都要插入电话插座才能获得因特网的上网许可。
4·Put the socket in a working queue.
把这个插座放在工作队列中。
5·The same catalogue included a type of two-pole concentric plug and socket.
相同的目录包括一种两极同心插头和插座。
1·The peer on the left performs two socket writes of 100 bytes each.
左边的对等层完成两个套接字的写操作，每个100字节。
2·There are no issues of response buffering because this socket is under direct control of application.
响应缓存的问题不复存在，因为这个套接字直接受应用程序的控制。
3·The check is actually redundant in this example, because the constructor for the default socket implementation performs the same check.
在这个示例中，检查实际上是多余的，因为缺省套接字实现的构造函数也执行相同的检查。
4·The server end of the socket is created on the machine where the server application is running and given a port, and it then listens on this port for a connection from a client application.
套接字的服务器端是在运行服务器应用程序的机器上创建的，服务器应用程序获得一个端口并在该端口上侦听来自客户端应用程序的连接。
5·One instance of IDS should be configured and running with socket connection.
应该配置一个IDS实例并通过套接字连接运行。
1·Clean chamfered end of pipe and socket.
清洁管子末端棱角和插口。
2·Tenacity, particularly one used in jack socket part, not easily deformed.
韧性强，特别是应用于插座插口部分，不易变形。
3·Top view of fluted socket head set screw. Selection box represents thread diameter.
凹槽插口螺钉的俯视图。选择框代表螺纹直径。
4·Set the socket dimensions and the other parameters in the property page that appears for each of the eye sockets.
设置插口维度和其他参量在为每一个眼球孔出版的物产页。
5·The office is equipped with lighting, air - conditioner, telephone, Internet and electric socket.
办公室配有照明、空调、电话、网络和电源插口。
1·Put down the hammer and screwdriver, and place the socket over the nut and turn.
放下锤子和螺丝刀，将套筒扳手放到螺母上拧动。
2·So, put down the hammer and screwdriver, and place the socket over the nut and turn.
那么，放下锤子和螺丝刀，将套筒扳手放到螺母上拧动。
3·Otherwise, you might feel as if you are using a socket wrench as a hammer hitting the handle of a screw driver to loosen a nut and bolt.
否则，您可能感觉到像用锤子一样使用一个套筒扳手来敲击螺丝刀手柄而拧开螺栓的螺母。
4·Now consider being given a socket wrench.
现在设想一下使用一个套筒扳手。
5·Remove one socket pin head screw, three socket head bolts and gear operator cover.
拆卸一个灯头钉头螺丝，三个套筒头螺栓和齿轮执行机构盖。
1·This standard covers the procedures for the heat joining of pipe and fittings made from polyolefin materials utilizing either the socket or butt fusion methods.
这个标准涵盖采用承插热熔和对焊热熔方法对聚烯烃材料管道和连接件进行热连接的程序。
2·They formerly covered only Socket Type fittings.
它们以前仅仅涵盖承插类型连接件。
3·PE pipe hot melt socket and hot melt docking interface tensile strength and blasting strength are higher than the pipe ontology.
聚乙烯管件热熔承插和热熔对接接口抗拉强度及爆破强度均高于管材本体。
4·Ji 'nan stainless steel pipe connection methods are commonly used welding connection, socket welding connection and pipe thread connection.
济南不锈钢管的衔接方法常用的有对焊衔接、承插焊衔接以及管螺纹衔接。
5·Weight shown represents the socket figure.
显示的重量代表承插型号。
1·It is after all a simple ball and socket joint; it has certain loads imposed on it; it needs reliability over a defined life; it must contain materials suitable for the working environment.
它毕竟是一个简单的球窝关节；它有一定的载荷；它在有限的生命中需要可靠性；它必须包含适合工作环境的材料。
2·Other signs include pain radiating into the hip socket, or down the outside of the leg, or deep inside the belly over the anterior surface of the S-I joint.
其他特征还有，疼痛呈辐射状向大腿窝或腿部发散，或者越过骶髂关节向腹腔内部发散。
3·They made joints in stone keeping the lintels in place horizontally using a tongue and groove joint and subsequently fixing the upright and lintel with a ball and socket joint or mortice and tenon.
石匠们用楔口连接法将楣石水平放置，将石块连接起来，然后将这些直立的石块和楣石用球窝接头或楔口接头来固定。
4·Objective to analysis the key points of postoperative nursing of eye socket reconstruction with free flap.
目的总结分析游离皮瓣眶窝再造术后的护理要点。
5·There may also be slight inward deviation of the weight-bearing surface of the socket (dorsal acetabular rim) causing the socket to appear slightly shallow (Figure 4).
这也可能是关节窝负重表面的些微内部误差而造成关节窝看起来稍浅(图四)。
1·The improved bearing is annular, having an outer dimension sized to seat within the housing of a suspension joint or movable socket.
该改进的轴承是环形的，具有与悬挂接头的壳体或可移动的承窝的内部相配合的外部尺寸。