slenderness ratio
纤细比：结构构件的长度与其最小回转半径的比值。
常用释义
英式发音
美式发音
基本释义
- 纤细比：结构构件（如柱子）的长度与其最小回转半径的比值。
例句
-
1·The approach of equivalent slenderness ratio is recommended for calculation purpose.计算方法宜采用换算长细比法。
-
2·Tests show that the strength of column decreases as its slenderness ratio increases.试验表明，这种柱子的承载能力随长细比的增大而显著下降。
-
3·A calculation method for equivalent slenderness ratio by a graphical method is presented.给出了应用图表法的换算长细比计算方法。
-
4·The problems encountered in theoretical limit analysis of columns with medium slenderness ratio are discussed.文中论述了求解中长柱承载能力在理论上所遇到的若干困难。
-
5·The parameters used in the analyses include rise to span ratio, slenderness ratio, steel ratio and load conditions.分析的参数有矢跨比、长细比、含钢率以及加载方式。
-
6·The bearing capacity and the ductility of a FRP-confined concrete column decrease with the increase of slenderness ratio.随着长细比的增加，FRP约束混凝土柱的承载力和延性有降低的趋势。
-
7·The ground settlement can be manipulated by changing the pile slenderness ratio of blocked foundation with the pile below.采用下设桩基的块式基础，可通过改变桩的长径比来控制地基沉降。
-
8·The experimental results show that the bearing capacity of the specimens decreases with the increase of the slenderness ratio.结果表明，加固构件的承载力随着长细比的增大而降低。
-
9·Eccentrically loaded concrete filled steel tubular (CFST) laced columns were tested with slenderness ratio as main experimental parameter.进行了钢管混凝土格构柱偏心受压试验，试验参数为长细比。
-
10·Also analyzed are the influences of CFRP ratio, Angle steel ratio, slenderness ratio and eccentricity to the mechanical properties of the columns.同时在此基础上分析了长细比、含角钢率、含碳纤维布率和偏心距等因素对复合加固偏压柱力学性能的影响。