shrinkage cavity
缩孔
常用释义
英式发音
美式发音
基本释义
- 缩孔：金属铸造过程中由于冷却不均匀或金属凝固时体积收缩而形成的孔洞。
例句
-
1·Shrinkage cavity predication is main purpose of casting simulation.预测缩孔缺陷产生是铸件凝固模拟的主要目的。
-
2·The main deformity of the center housing cast in the automobile turbocharger is shrinkage cavity.在汽车涡轮增压器中心架铸件生产中主要产生缩孔缺陷。
-
3·When such a steel solidifies, a shrinkage cavity know as a "pipe" is formed in the top central part of the ingots.当这种钢液凝固时，在钢锭头部中央会形成收缩孔。
-
4·It is discussed that adiabatic material, as well as ratio of height and width effected solidification, shrinkage cavity and shrinkage porosity.讨论了锭模的高宽比、绝热板材质对凝固位置及缩孔疏松的影响。
-
5·The main task of this paper is to develop prediction & analysis system of shrinkage cavity and porosity defect in a casting for foundry engineering application.本论文以有限元分析软件为开发平台，运用设计参数化和功能模块化技术，初步开发了面向铸造工程应用的铸件缩孔缩松预测及缺陷分析系统。
-
6·Large thick-section ductile Iron housing easily produces casting defects such as shrinkage cavity, shrinkage porosity, graphite floating and spheroidizing decay.大型厚断面球墨铸铁件在铸造过程中极易产生缩孔、缩松、石墨漂浮及球化衰退等铸造缺陷。
-
7·Batch production shows there are no shrinkage cavity and porosity in casting, and no blowholes and sand inclusions on the top surface. The yield of the casting is 81%.经批量生产验证，铸件内无缩孔、缩松缺陷，上表面无渣孔、气孔缺陷，工艺出品率81%。
-
8·The influence of chemical composition, inoculation process, temperature of molten iron and pouring system on the formation of shrinkage cavity and porosity was described.叙述化学成分、孕育工艺、铁液温度及浇注系统等因素对薄壁球铁铸件缩孔和缩松形成的影响。
-
9·The shrinkage cavity, depression, shrinkage porosity, scab and swell defects often took place with the heavy plate castings produced by adopting traditional foundry method.厚实板类铸件按传统工艺生产，容易产生缩孔、缩凹、缩松、夹砂、胀包等铸造缺陷。
-
10·It is liable to produce various casting defects, such as coarse grain, shrinkage cavity, shrinkage porosity, hot tearing, microstructure segregation and solute segregation.在铸造过程中容易产生各种铸造缺陷，如晶粒粗大、缩孔缩松、开裂、组织和成份偏析等。