shot peening
喷丸强化：一种加工工艺
常用释义
英式发音
美式发音
基本释义
- 喷丸强化：一种加工工艺，用于加强和缓解钢制汽车曲轴和连杆等零件的应力。
例句
-
1·Shot peening is also improved the stress relaxation ability of copper alloy.喷丸处理亦能改善铜合金的应力松弛性能。
-
2·Crack initiation life is much longer than those of low shot peening pressure.低喷丸强度试件表面微裂纹大量萌生，密度非常高。
-
3·The SCCR could be further improved by promptly polishing the surface after shot peening.若喷丸强化后再表面磨光，则可以进一步改善喷丸强化提高SCC抗力的效果。
-
4·Mechanic shot peening is a traditional process and widely employed by industrial circles.传统的机械喷丸工艺在工业界已经得到广泛的应用。
-
5·The surface residual stresses of the rolled workpieces can be reduced remarkably by shot peening.滚压后再喷丸显著降低工件的表面残余压应力。
-
6·The feasibility of improving K417 fatigue life by surface shot peening and recrystallization was studied.研究了采用喷丸再结晶方法提高K417 合金疲劳寿命的可行性。
-
7·The microhardness and surface roughness of specimens before and after shot peening was studied and analysed.分析研究了喷丸强化处理前后的显微硬度和表面粗糙度。
-
8·The fatigue strength of commercial purity titanium was improved through shot peening or cold rolling treatment.工业纯钛经喷丸、滚压强化后，疲劳强度得到不同程度的提高。
-
9·Shot Peening(SP)is a typical severe plastic deformation method to produce ultra-fine grains of metallic materials.高能气动喷丸是通过剧烈塑性变形产生细晶材料的方法之一。
-
10·It has been shown that the high cycle and the low cycle fatigue strength can be obviously improved by shot peening.结果指出，喷丸引起表面形变层内的上述变化，能够有效地提高粉末合金高温下的高周和低周疲劳性能。
同义词