rupture strength
破断强度：材料在受到拉伸或压缩时破裂的最大承受力。
常用释义
英式发音
美式发音
基本释义
- 破断强度：材料在受到拉伸或压缩时破裂的最大承受力。
例句
-
1·When webs weight increases, rupture strength, tearing strength and bursting strength are increased.随着纤网定量的增加，断裂强度，撕破强度和顶破强度增加。
-
2·Results showed that sinter-HIP treatment can enhance the transverse rupture strength of WC-Co cemented carbides effectively.结果表明：低压烧结工艺可以有效提高硬质合金的抗弯强度；
-
3·The hardness increased, but the density, transverse rupture strength and compressive strength decreased when prolonging the holding time.随着球磨时间的延长，烧结合金的硬度升高，密度、横向断裂强度和压缩强度均下降。
-
4·The effects of milling time and sintering temperature on density, hardness, transverse rupture strength and compressive strength were mainly studied.重点研究了球磨时间和烧结温度对烧结合金的密度、硬度、横向断裂强度和压缩强度的影响。
-
5·It was also found that at a fixed temperature the transverse-rupture strength of the alloy generally increased with the steepness of load-deflection curves.还表明，在一定温度下，载荷-挠度曲线越陡，合金的抗弯强度一般也越高。
-
6·Transverse rupture strength, Rockwell a hardness, magnetic saturation induction and magnetic coercivity of samples sintered in vacuum or by sinter-HIP were measured.测试了真空烧结和低压烧结试样的抗弯强度、洛氏硬度、磁饱和度和矫顽磁力。
-
7·The results showed that cemented carbide manufactured by sinter-HIP is free of porosity and transverse-rupture strength, bending fatigue life are also greatly increased.结果表明，烧结-热等静压制作的硬质合金孔洞消除了，并且硬质合金的抗弯强度和弯曲疲劳寿命也大幅度提高。
-
8·The road performance test include: compression strength, cleavage strength, rupture strength, modulus of compression strength resilience, shrinkage, fatigue test and washout test.路用性能的试验内容包括：抗压强度、劈裂强度、抗弯拉强度、抗压回弹模量、温缩干缩、抗冲刷试验、冻融试验和疲劳性能试验。
-
9·With good transversal rupture strength and wear resistance, it is suitable for low-speed rough turning and milling of heat resistanct alloys, titanium alloys and of plastics glass well.具有很高的抗弯强度和良好的耐磨性能，适用与低速粗车和铣削耐热合金、 钛合金，也可加工玻璃钢。
-
10·Elevating sintering temperature, the density increased and the hardness decreased, but the transverse rupture strength and compressive strength were increased at first and then decreased.随着烧结温度的升高，烧结合金的密度增加，硬度降低，横向断裂强度和压缩强度则先升高后降低。