rotational molding
旋转成型：一种塑料制品生产工艺
常用释义
英式发音
美式发音
基本释义
- 旋转成型：一种塑料制品生产工艺，通过将熔融塑料在一个旋转的模具中均匀分布，使其在冷却过程中固化成所需形状。
例句
-
1·Rotational molding process provides the product extra strength and sturdy feature.滚塑工艺成型，产品结构坚固。
-
2·And the development of different kinds of plastics for rotational molding especially PE were discussed.探讨了可用于回转成型的各类塑料，尤其是聚乙烯的研究开发情况。
-
3·The development of the plastics for rotational molding rotational molding machines and technics was reviewed.综述回转成型塑料、设备与工艺的研究进展。
-
4·It introduced the processing technology of the product from composite materials by means of rotational molding method.介绍了利用旋转模塑方法成型复合材料制品工艺。
-
5·The article deals with the situation and development tendency of rotational molding of plastics both at home and abroad.本文简要介绍了目前国内外滚塑工业的现状与发展趋势。
-
6·The defects of stamping and plastic-absorbing technology were analyzed, and the principles and merits of rotational molding were introduced.分析了冲压技术和吸塑技术的缺陷，介绍了滚塑成型的原理和优点。
-
7·Rotational molding is good to deal with large and complex tanks. And rotationally molded tanks can be very strong by increasing its wall thickness.滚塑工艺适合做大型、复杂的水箱或油箱。并且滚塑的水箱或油箱可以通过调整壁厚来增加强度。
-
8·The method and application of rotational molding were introduced. The intention and signification of solving defects of rotational molding products were presented.简要介绍了旋转滚塑成型的方法和用途，指出了研究并解决滚塑制品缺陷的目的和意义。
-
9·It was suggested that in the rotational molding, the initial viscosity controlled the wall thickness of the product and the gel rate controlled the uniformity of the wall thickness.试验表明，树脂体系的初始黏度对制品最终壁厚影响较大，体系的凝胶速率对制品壁厚均匀性影响较大。
-
10·Steel, net, plastic 3-1 - will be welded to the steel wire mesh surface to polyethylene as raw material, the use of rotational molding technology, an overall shape in the steel surface.钢、网、塑3合1——将钢网焊接于钢体表面，以聚乙烯为原料，采用滚塑技术，一次整体成型于钢体表面。