群发资讯网

返回主页
rotary inertia
旋转惯性:物体在旋转过程中
常用释义
英式发音
美式发音
基本释义
  • 旋转惯性:物体在旋转过程中,由于其质量分布和旋转轴的关系,使物体在旋转过程中产生的一种惯性力。
例句
  • 1·The effect of shear deformation and rotary inertia are considered in the paper.
    文中考虑了剪切变形和转动惯量的影响。
  • 2·Servo motor has a long overload ability, have smaller rotary inertia and big plugging around moment.
    伺服电机有较长的过载能力,有较小的转动惯量和大的堵转转矩。
  • 3·Notes:Weight and rotary inertia are approximate value calculated by the greatest shaft-hole dia. of Y type hole.
    注:重量、转动惯量是按最大轴孔直径Y型孔计算的近似值。
  • 4·It is also shown that the influence of the rotary inertia of the mass block on the shear failure is not negligible.
    质量块的转动惯量对于剪切失效具有不可忽略的影响。
  • 5·The result also denotes rotary inertia and the shear formation of the beam have significant effect on the high frequencies.
    考虑梁的剪切变形和转动惯量时,对梁的高阶频率影响较大。
  • 6·The result also denotes the shearing deformation and rotary inertia of the beam have significant effect on the high frequency.
    当考虑梁的剪切变形和转动惯量时,则对梁的高阶频率影响较大。
  • 7·To study the influence of rotary inertia on gear flowmeter natural frequency, keep damping and leakage coefficient as constant.
    结果表明:与增大泄漏系数、阻尼系数相比,减小转动惯量可以明显的提高流量计的频率响应。
  • 8·But when the rotary inertia of the hub is close to that of the beam, the zeroth-order approximation model may lead to wrong result.
    但当中心刚体的转动惯量接近柔性悬臂梁的转动惯量时,零次近似模型将导致错误的结果。
  • 9·The natural frequencies of the intelligent beam with the rotary inertia and shear deformation of the beam are lower than that without those.
    考虑梁的转动惯量和剪切变形时,智能阶梯梁的频率比没有考虑时的要低。
  • 10·The vibration and noise of the pump. 7 because the rotary inertia force component inside the pump is low, can work under high rotation speed.
    ⑥泵的振动和噪声极小。 ⑦因为泵内的回转部件惯性力较低,可在高转速下工作。