nut cap
螺帽
常用释义
英音[ nʌt kæp ]
美音[ nʌt kæp ]
基本释义
- 螺帽
例句
-
1·Our factory was founded in 1986, mainly produce glue nut cap, plastics printing trademark for wine, as well as all kinds of bottle cap of wine.我厂始建于1986年，主要以生产葡萄酒用胶盖帽，塑料印刷商标，以及各种葡萄酒瓶配套用瓶盖为主。
-
2·Cable inner end must use steel nut cap. Lead sealing is required for the sealing between the cable inner head and metal sleeve, which has a good sealing property.电缆内端头应使用钢制封帽，与金属套的密封必须采用铅封，密封性能良好。
-
3·After completing adjustments, tighten the lock nut and replace the fast fill lever cap.在调节完成后，紧固锁紧螺母，重新安装快速进水手柄帽。
-
4·Remove the fast fill lever cap, and loosen the lock nut.拆卸快速进水手柄帽，松开紧锁螺母。
-
5·NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.注：如果出现少量的泄漏，则拆卸锁紧螺丝，然后锁住垫圈和阀盖，然后轻轻紧固填料压紧螺母。
-
6·Right dropout - right chain tensioner - right torque washer - right cap nut.正确的辍学-链拉紧的权利-权利扭矩洗衣机-帽螺母的权利。
-
7·When disassembled, the high-pressure kettle nut is disassembled, and the high-pressure kettle cap and the sealing ring are removed to take out the liner.拆卸时只要将高压釜螺母卸下，取下高压釜帽，去掉密封环，即可取出内衬。
-
8·Through mechanical test and chemical analysis and technological experiment of the cracked cap nut, it was concluded that the short size of nut blank caused surface crack.对开裂杯形螺母的力学性能和化学成分进行了检验分析，并进行了工艺试验。结果表明，毛坯尺寸偏短是造成开裂的主要原因。
-
9·The mother of nylon lock, metal lock master, K cap, hex nut, cap-shaped, butterfly hats and all kinds of washers, retaining rings, pins and so on.尼龙锁紧母、金属锁紧母、K帽、六角螺母、盖帽形、蝶形帽及各式垫圈、挡圈、销类等。
-
10·The invention discloses a connecting mechanism of sealed insulation pipelines, comprising a straight-through joint, an insulation cap, a spherical joint, an insulation sleeve ring and a cap nut.本发明公开了一种密封绝缘管路连接机构，包括直通接头、绝缘帽、球型接头、绝缘套 环和外套螺母。