1·Demonstration the prevent nip function and control door and window, syllabify and clarity to demonstrate the control system.
通过对防夹功能和控制车门车窗的演示，清晰地和有调理地将各项功能演示清楚。
2·Otherwise, build in the magnetoresistive Angle sensor to test the window position, for come true prevent nip function.
另外巧妙的安装上磁阻角度传感器，测量车窗玻璃位置，实现防夹功能。
3·In order to install and nip this instrument convenience during testing and locate the exact position by an operator, special clamp and lifting equipment are designed in the auto-detection instrument.
为了操作者在检测过程中能方便地装夹该检测仪并能准确定位，本自动测试仪采用了专用夹具和升降机构。
4·A new structural design method of steel core concrete columns using double beams nip column and shear bolts is presented in this paper.
工程中采用的双梁夹柱、穿心承重销方案为确保梁柱节点传力可靠、施工方便提供了一种简洁实用的方法。
5·Through the analysis of the structure and technological process of the bottom crossband, a reasonable process for bending the pipe nip of the bottom crossband was determined.
通过对下横条的结构与工艺分析，确定了下横条管夹弯曲的合理的工艺方案，并设计了能够同时弯直边和弯管夹的模具，提高了生产效率，降低了生产成。
1·If they are properly dewatered with suction boxes before entering the nip.
如果进入压区之前，他们得到适当的吸水箱脱水。
2·A higher sheet temperature softens the cellulose fibers and makes the sheet more compressible: it also increases water fluidity, enabling the water to leave the nip more rapidly.
较高的纸幅温度软化了纤维素，使纸幅更具有压缩性：它还增加水的流动性，使水更迅速的离开压区。
3·The loading pressure is calculated separately for each rider roll depending on the required nip pressure and respective sheet length. The related diameter–dependent set curve is stored in TRUTEC .
加载压力被单独为各自的骑辊加压，根据压区压力要求和各自的复卷长度，相关的纸卷直径，根据在TRUTEC设定的曲线。
1·And then you'll give him a nip, like I do. '.
然后，你就像我这样捏他一下。