群发资讯网

返回主页
modulus of compression
压缩模量
常用释义
英式发音
美式发音
基本释义
  • 压缩模量
例句
  • 1·The road performance test include: compression strength, cleavage strength, rupture strength, modulus of compression strength resilience, shrinkage, fatigue test and washout test.
    路用性能的试验内容包括:抗压强度、劈裂强度、抗弯拉强度、抗压回弹模量、温缩干缩、抗冲刷试验、冻融试验和疲劳性能试验。
  • 2·We can calculate compressibility modulus of the desert sand from this Normalization compression curve and apply it to the settlement computation of desert foundation.
    利用该归一化压缩曲线可计算不同初始干密度、不同应力范围下沙漠砂的压缩模量,并将其结果应用于沙漠地基的沉降计算。
  • 3·The models for predicting elastic modulus along the grain of poplar veneer were built, in which compression ratio, glue content, density, and thickness of veneer were considered.
    着重讨论速生杨木单板顺纹弹性模量预测模型,模型中考虑到单板的压缩率、单板中含胶量、单板的密度和单板的厚度等影响因素。
  • 4·The elastic constitutive equations, the composite elastic modulus and the composite axial compression stiffness of CFST are derived.
    导出了钢管混凝土柱弹性本构方程、组合轴压弹性模量和组合轴压刚度的理论计算公式。
  • 5·The response to electric field of the composite systems was studied by measure of compression modulus of the elastomers and dynamic-exam of resistance in the cure .
    通过对弹性胶体压缩模量的测试和胶凝过程中电阻的动态监测,研究了胶体体系对电场的响应行为。
  • 6·Deformation Modulus and Compression Modulus of Soil are very important to geotechnical engineering design.
    土的变形模量和压缩模量对岩土工程设计具有非常重要的意义。
  • 7·The response to electric field of the composite systems was studied by measure of compression modulus of the elastomers and dynamic-exam of resistance in the cure process of the systems.
    通过对弹性胶体压缩模量的测试和胶凝过程中电阻的动态监测,研究了胶体体系对电场的响应行为。
  • 8·Comparing with the uniaxial compression, the Young's modulus and the yield stress of the biaxial compression increase obviously.
    与单轴压缩相比较,双轴压缩的弹性模量和屈服应力有明显的提高。
  • 9·The compression modulus of the reinforcing material showed the similar trend with the elastic modulus.
    该材料增强的压缩弹性模量与拉伸弹性模量规律几乎一致。
  • 10·The different influences on tangent bulk modulus of conventional triaxial test and isotropic compression test were considered.
    考虑了常规三轴试验和各向同性压缩试验对切线体积模量的影响。