mode locking
[电子] 锁模
常用释义
英式发音
美式发音
基本释义
- [电子] 锁模，波模锁定；振荡型同步
例句
-
1·Mode locking can be induced not only by loss modulation, but also by phase modulation.锁模不仅可用损耗调制取得，也可用位相调制来得到。
-
2·The mode locking means is adapted to be in a first extreme position and in a second extreme position.该模式锁定装置适合位于第一极限位置和第二极限位置。
-
3·The place rule of work material, laser fiber to select mode and mode locking apparatus are researched in this paper.本文基于对上述模型的设计，讨论了谐振腔中工作物质的摆放，引导光束并且进行模式选择的选模光纤和锁模器件。
-
4·The starting characteristics are theoretically analyzed according to the self-starting condition of Kerr lens mode locking.利用克尔透镜锁模自启动条件，对常用的四镜腔激光器的启动特性进行了系统分析。
-
5·The mode locking means is adapted to be in the first extreme position during dose setting and the second extreme position during injection of a set dose.该模式锁定装置适合在设定剂量过程中处于第一极限位置，且在注射设定剂量过程中处于第二极限位置。
-
6·Taking the cavity parameters providing a most efficient mode locking and based on fluctuation model, we performed a numerical simulation of laser operation.利用产生最有效锁模的腔参数及涨落模型，进行了激光过程的数值模拟。
-
7·It is suggested that using a NACLM as a passive mode locking element, generation of ultrashort pulses of very high repetition rate is promising with a fiber laser.实验表明，采用非线性放大复合环形镜构成复合腔光纤激光器，有可能获得高重复频率的锁模脉冲。
-
8·The effects of phase bias and group velocity dispersion on mode locking mechanism are analyzed. The operating conditions for stable short pulse generation are obtained.分析了相位偏置和光纤的色散对锁模机制的影响，获得了产生稳定超短光脉冲的条件。
-
9·The practical structure of die casting mould with the rotational automatic thread demoulding for shell parts, the calculation of mode locking force and the process parameters were presented.给出了罩壳零件旋转自动脱螺纹压铸模实用结构，锁模力计算和工艺参数，论述了模具工作原理和设计要点。
-
10·The article discusses the differences in physical mechanism of mode locking by laser pulse injection between the dispersion region at positive group velocity and that at negative group velocity.本文阐述工作于正、负群速色散区中的光脉冲注入锁模的物理机制的区别。