群发资讯网

返回主页
magnetic saturation
磁化强度达到最大值
常用释义
英式发音
美式发音
基本释义
  • 磁饱和:指磁性材料在外加磁场作用下,磁化强度达到最大值,再增加磁场强度也无法使磁化强度继续增加的现象。
例句
  • 1·Magnetic saturation effect on the saliency is used to distinguish the north magnetic pole from the south.
    磁饱和影响的显着性是用来区分从南部的北磁极。
  • 2·In this study, flux distribution is obtained with regard to magnetic saturation, which makes more accurate analysis possible.
    本文研究中,所得到的磁通分布是相对于磁路饱和的,因而使分析更为精确成为可能。
  • 3·A mathematical model to calculate the field current of a synchronous generator is presented, considering magnetic saturation effect.
    在考虑同步发电机磁路饱和效应的基础上,提出了发电机励磁电流计算的数学模型。
  • 4·The model can depict radial force and electromagnetic torque generated in the motor more accurately in the region of magnetic saturation.
    在大电流饱和状态下,该模型有效地描述了电机产生的径向悬浮力和电磁转矩。
  • 5·The above calculated results were based on two-dimensional nonlinear analysis, which did not allow for magnetic saturation at the back yoke.
    上述计算结果是基于二维非线性分析,没有考虑导磁机壳的饱和问题。
  • 6·Special attentions were paid on the influence of magnetic saturation. The tests showed that under proper parameter coordination magnetic rings …
    试验结果表明,在适当的参数配合下,磁环能够有效抑制特快速暂态过电压的幅值和陡度。
  • 7·Load method is used to calculate the parameters of PMSM, in which the material characteristics reflect the magnetic saturation under actual operation.
    采用负载法计算永磁同步电动机的参数,使参数中的材料特性真正反映了实际负载条件下磁介质的饱和情况。
  • 8·Transverse rupture strength, Rockwell a hardness, magnetic saturation induction and magnetic coercivity of samples sintered in vacuum or by sinter-HIP were measured.
    测试了真空烧结和低压烧结试样的抗弯强度、洛氏硬度、磁饱和度和矫顽磁力。
  • 9·Generally, when armature current is flowing, magnetic saturation takes place due to the influence from armature reaction flux, and torque linearity is impaired [10].
    通常,当电枢电流流过时,由于受电枢反应磁通的影响,电机磁路会出现饱和,转矩的线性性被破坏。
  • 10·The ferromagnetic materials which has high magnetic saturation, high characteristics of magnetic conductive and low remanence should be chosen first for the higher heat power.
    在选择发热部件的材料时,应主要考虑具有磁饱和度高、导磁特性高,并且剩磁小的铁磁性材料,以便获得较大的发热功率。