inner rotor
内转子
常用释义
英式发音
美式发音
基本释义
- 内转子；内齿轮
例句
-
1·Double cooling of inner rotor and outer jacket ensures effect of mateerial cooling.内转子、外夹套双重冷却，物料冷却效果好。
-
2·Profile equation of complex inner rotor is deduced and analyze, and accurate equation of cycloid rotary pump flow is produced.最后用一个摆线转子泵计算的实例对计算公式进行验证并绘出了摆线转子的图形。
-
3·The invention relates to a radiator fan, which comprises a fan frame, an inner rotor motor, at least an impeller and a circuit wafer.一种散热风扇，其包含一个扇框、一个内转子马达、至少一个叶轮 及一个电路板。
-
4·The flywheel composed of two-layer rotor is fabricated usually by extrusion of the inner rotor and the outer rotor together, so there is a pre-displacement in the interface between the two layers.因为两层转子结构飞轮一般是由内、外两层转子通过挤压组合而成，故在两层的接触面上就有初始位移。
-
5·The outer rotor has the trend of revolution along the inner rotor and this trend must be overcome by the cylinder via the action of a support force in an internal-meshing rotary cycloid compressor.为了限制内啮合摆线转子压缩机中外转子绕内转子公转的趋势，在外转子上施加一个支撑力，对支撑力的位置进行了详细分析。
-
6·Think of it as a rotating transformer, with the primary windings residing in a stationary casing (stator) and the secondary conductors attached to an inner shaft (rotor).你可以把这种电动机当作一个旋转变压器，其主要的线圈在固定套管(定子)内，二级导线附在一个内轴(转子)上。
-
7·Tesla's invention is, in essence, a rotating transformer. Its primary windings reside in a stationary steel casing (the stator) and and secondary conductors are attached to an inner shaft (the rotor).尼古拉·特斯拉发明的感应电动机本质上就是一台旋转变压器——首先在电动机的固定钢制外壳（定子）上安装上绕组，然后将导体安装入内轴（转子）。
-
8·With the power being DC, the current of inner winding of the magneto is AC, and the rotating part is just similar to the magnetic rotor of synchronous dynamo.无刷直流永磁电机的电源虽是直流电，但其内部绕组中的电流仍是交流电，其旋转部分犹如同步电机的磁极转子，其结构及电磁原理与同步电机相似。
-
9·The rotor has an inner impeller structure to accommodate fluid flow, and it is driven by a brushless DC motor.泵浦转子为一内部叶片结构，由无刷直流马达带动推进流体。
-
10·Single-screw pump is a new volume of the inner rotary gear pump. The main working parts are eccentric screw (rotor) and fixed bushing (stator).单螺杆泵是一种新型的内啮合回转式容积泵。主要工作部件是偏心螺杆（转子）和固定的衬套（定子）。