impeller diameter
叶轮直径：指叶轮的最大直径。
常用释义
英式发音
美式发音
基本释义
- 叶轮直径：指叶轮（一种旋转的机械装置，用于将能量从马达传递到流体）的最大直径。
例句
-
1·The trim exponents vary with the fluid viscosity and impeller diameter ratio at same time.切割指数同时随着切割后的直径比和液体粘度变化而变化。
-
2·When pumping water, the head, shaft power and efficiency of the pump decrease with the reducing in impeller diameter.输送水时，叶轮切割后，泵的扬程、轴功率、效率都下降。
-
3·There is a relationship between the trim exponents and impeller diameter ratio, namely the exponents vary with the ratio.叶轮切割指数与直径比的确存在着某种关系，也就是切割指数随着切割后的直径比的变化而变化。
-
4·Pump lift pump depends on the size of the structure such as the impeller diameter the size of the blades bend, and so on, the speed.泵的扬程大小取决于泵的结构如叶轮直径的大小，叶片的弯曲情况等、转速。
-
5·This thesis introduces the design of impeller diameter measuring mechanism in robot flexible polishing machine tool on the basis of rack-and-pinion linear diploid mechanism theory.介绍了根据齿轮齿条直线倍程机构原理设计的机器人柔性抛光机床的轮径检测机构。
-
6·Final design scheme is confirmed after economic and technical analyse. Then, axial fan 's stage type, impeller diameter, hub ratio , specific speed and the number of blades are decided.在进行经济技术性分析后，最终确定风机的设计方案，进而确定通风机适当的级型式、叶轮尺寸、轮毂比、转速和叶片数等基本参数。
-
7·The diameter of the impeller is reduced through cutting impeller to improve the factual performance, reduce noise and motor current, so that it can be run steadily for a long duration.通过切削叶轮缩小叶轮直径，改变离心泵实际性能，降低噪音和电机电流达到稳定长周期运转的目的。
-
8·The impeller has an outer diameter of 72mm and an inlet diameter of 24mm.叶轮的外径为72毫米，进流处直径为24毫米。