graft polymerization
接合聚合
常用释义
英式发音
美式发音
基本释义
- 接合聚合
例句
-
1·Methanol is the most effective solvent for graft polymerization.甲醇是接枝反应最有效的溶剂。
-
2·The results show that the PP film loses weight after the graft polymerization takes place.实验结果表明，PP膜经过反应后，质量减少。
-
3·The effects of graft polymerization time and the polymerization initiated by BPO on the oil absorption oft…重点考察了接枝聚合反应时间和后处理对树脂性能的影响。
-
4·The conditions of dielectric barrier discharge plasma initiation graft polymerization of linen are investigated.研究了大气压介质阻挡放电引发亚麻接枝丙烯酸的工艺条件。
-
5·The influence of reaction temperature, initiator level. reaction time and rubber level on the graft polymerization was investigated.考查了反应温度、引发剂用量、反应时间和胶用量对接枝共聚反应的影响。
-
6·It is found that the rate of graft polymerization increased with the increase of radiation dose, dose rate and monomer concentration.发现接枝率随着剂量、剂量率及单体浓度的增加而增加。
-
7·In this paper a general review on the progress of modifying polymeric surface through UV - induced graft polymerization is presented.本文总结了利用紫外光接技改性聚合物表面的研究进展。
-
8·The pretreatment of starch before graft polymerization within certain temperature range was favour of improvement of absorbability of products.实验说明，淀粉在参加接枝聚合反应之前进行一定温度范围条件下的预糊化处理有利于最终产品的吸水性能；
-
9·It relates to reaction principle of cr with methyl-acrylate graft polymerization, formulation of adhesive solution and manufacturing technology.叙述了氯丁橡胶与甲基丙烯酸甲酯接枝聚合的反应原理，胶粘剂溶液的配方以及制造工艺操作过程。
-
10·ATP was treated with four different modifier and next graft polymerization processed with butyl acrylate (BA), and the organic ATP were obtained.采用四种不同的改性剂对凹凸棒土进行表面改性，接着与丙烯酸丁酯接枝得到有机化凹凸棒土。