1·Yin held various positions at Applied from 1991 to 2004, including general manager of the etch products group, according to the suit.
尹志尧1991年至2004年间曾在应用半导体公司担任多种职位，如蚀刻产品集团的总经理等。
2·AMEC has basically cleared its name in the market. And despite the distractions, the company has made some inroads in the market, mainly in etch.
现在AMEC终于重振市场名声，而尽管因受到诉讼案的干扰，公司依然在市场拓展方面取得了一些成效，其成效主要在蚀刻产品方面。
3·For instance the Substrate wallpaper I'm using presently will slowly etch a pattern on the home screen over the course of an hour.
例如，我现在使用的壁纸过一个小时会慢慢的在主屏上蚀刻一个图案。
4·While most photographers are loathe to let a stray fingerprint near their negatives, Ben Ali Ong chooses to scratch, etch and generally distort his on purpose.
虽然绝大多数的摄影者都极度憎恶哪怕在底片上留下的一点点手指印，但是本.阿里.昂却通常故意选择用抓，蚀刻等方式来扭曲自己的底片。
5·Not so with the nanoelectric Etch A Sketch, which can selectively erase the conducting lines it creates by applying negative voltage.
纳米电子蚀刻素描可以通过施加负电压，对画好的线路进行选择性清除。 他们的成果刊登在去年出版的《科学》杂志上。
1·NITAL ETCH : Process of checking surfaces of ground product for cracks or burns by use of a series of acids and neutralizers.
硝酸酒精腐蚀检验：通过使用一系列的酸性或中性溶液检查磨削后零部件表面是否有裂痕或磨削烧伤。
2·With the protection of photoresist sidewall, the emitter passivation ledge is fabricated by wet etch.
利用光刻胶形成保护侧墙，用湿法腐蚀来形成发射极钝化边沿。
3·A novel method for measuring the anisotropic etch rate distributions of Si is described.
介绍了一种测定硅各向异性腐蚀速率分布的新方法。
4·Metal oxide etch usually happens on the thermal hydrodynamic test rig when its equipment, pipelines and valves are made of carbon steel.
在由碳钢制造的设备、管道和阀门等部件所组成的热工水力试验台架中，金属的氧化腐蚀是一个普遍存在的问题。
5·SEM pictures show that cysteine can etch the corner of triangular silver nanoprisms. And the shape of silver nanoprisms transformed from triangle to disk.
SEM观察到银纳米三角的角部会被半胱氨酸腐蚀，形状山三角形变为圆盘型。
1·The inability to etch chips with lasers in the shorter wavelengths has limited how precisely they can design circuits on silicon.
不能采用更短波长的激光进行芯片刻蚀已经限制了（芯片制造商）在硅晶上设计更精细的电路。
2·More often, all of the materials exposed to the etchant have a finite etch rate.
通常，所有暴露在刻蚀剂中的材料都具有一定的刻蚀速率。
3·Heat damage generally is removed by carefully machining the base metal. Afterward, another temper etch inspection is done to ensure that the machining did not create more heat damage.
去除热损伤的方法是仔细切削本体金属，然后，再做一次回火刻蚀检查，确保切削工作没有产生进一步的热损伤。
4·Based on ash chamber of metal etch this paper describes the full process of dry clean development and evaluation.
本文以金属刻蚀去胶腔为背景，简述干刻清洗工艺开发和评价过程。
5·More often , all of the materials etchant have a finite etch rate.
剂中的材料都具有一定的刻蚀速率。