discharging current
放电电流
常用释义
英式发音
美式发音
基本释义
- （电）放电电流，排出流：指电池或电容器等释放储存的电能的电流。
例句
-
1·In process, the surface accuracy is affected by motion parameters such as discharging current capacity and current impulse width.在加工过程中，加工表面精度自然受到加工参数的影响，其中包括放电电流能量、电流脉冲宽度等的影响。
-
2·The charging and discharging currents are controlled by the current flowing into IIN, and are modulated by the voltages applied to FADJ and DADJ.充放电的电流是由流入IIN端的电流来控制的，并由加到FADJ和DADJ上的电压调制。
-
3·Low voltage charging or discharging may also cause deterioration of capacitor such as shorting and open due to sudden charging and discharging current.即使是低电压充放电，也可能产生大的瞬间充放电电流，这可能会导致电容器性能的损害，比如说短路或开路。
-
4·The phenomenon of discharging in twice of underwater wire exploding is discovered by investigating the time characteristics of pulsed discharging current and voltage.通过测量水中铜丝电爆炸的电流、电压波形发现水中高压放电存在着二次放电现象。
-
5·Through the experiments with quickly wire cut of electric discharge machines, this paper analyzes and studied the influence regulation of the discharging current to the surf...通过在快走丝线切割加工机床上进行多次加工实验，本文研究分析了放电电流对线切割加工表面粗糙度的影响规律。
-
6·When it is discharging, the ions flow back and in the process cause a current to flow in an external circuit attached to the battery.放电时，离子回流，这个过程中会在连接到电池的外部电路中产生电流。
-
7·Discharging prior to BREAK-IN mode is optional. Overcharging during the BREAK-IN mode does not harm battery as the charging current is very slow.在使用BREAK - IN模式前先给电池放电是可以的。在BREAK - IN模式下对电池过充不会对电池造成伤害，因为充电电流非常小。
-
8·Charging speed will be improved through depolarization by first-phase intense current charging and reverse discharging method.通过一阶段大电流充电和反向放电去极化，有效提高了充电速度。
-
9·Arc current reducing rate and arc voltage at the time of arc discharging are established for every mathematical model.得到电弧放电瞬间每一模型下的电流变化率和电弧电压。
-
10·The experimental investigation about some hydraulics problems on cooling water discharging in current cooling technique was studied in the article.本文针对直流冷却方式中冷却水排放相关水力学问题进行试验研究。