群发资讯网

返回主页
cure time
固化时间:指某种物质在特定条件下完全固化所需的时间。
常用释义
英式发音
美式发音
基本释义
  • 固化时间:指某种物质在特定条件下完全固化所需的时间。
例句
  • 1·Required cure time depends on temperature, pipe diameter, and pressure application.
    所需要的固化时间与温度、管道直径和应用压力有关。
  • 2·The coating manufacturer shall be consulted to ascertain the proper cure time and methods.
    需要咨询喷涂厂家确定适当的固化时间和方法。
  • 3·The higher the temperature is, the longer cure time is, the larger volumetric expansion will be.
    并且苯并恶嗪的固化温度越高,时间越长,体积膨胀效应就越大。
  • 4·Following the cure time for the repair product, as described above, the repair shall be re-tested.
    在上述修补产品固化后,应再次检查修补部位。
  • 5·Now, if you discount your water (use less water than your recipe calls for) you can reduce your cure time.
    老手是可以从配方中去减少水量以达到缩短晾皂的时间。
  • 6·The influences of cure temperature, cure time and ambient humidity on the properties of the dam blank were discussed.
    探讨了养护温度、养护时间和环境湿度对坯体性能的影响。
  • 7·Besides the scorch time and optimum cure time of BIIR were shortened considerably while its curing rate increased obviously.
    与丁基橡胶相比,BIIR焦烧时间和正硫化时间明显缩短,硫化速度大大提高。
  • 8·The results show that with the increase of the amount of silica, the scorching time and optimum cure time of CR/TPI compounds are shortened.
    结果表明,白炭黑能加速CR/TPI并用胶的焦烧性能,同时降低了胶料的硫化速度。
  • 9·With the increasing of cure temperature, the scorch time and optimum cure time decreased, but the crosslink density had a tread of decreasing.
    硫化温度的提高会缩短焦烧时间和正硫化时间,但有使交联密度下降的趋势。
  • 10·With the same recipe, shorter cure time, comparative smaller degree of two laser beams and thinner PDLC film give rise to higher diffraction efficiency.
    较小的膜层厚度、较小的光束夹角和较短的曝光聚合固化时间有利于衍射效率的提高。