compressive deformation
压缩变形
常用释义
英式发音
美式发音
基本释义
- 压缩变形；压缩形变
例句
-
1·The Mid-Late Jurassic semi-foreland basin formation and Early Yanshan compressive deformation stage;中晚侏罗世类前陆盆地的形成和早燕山期挤压变形阶段；
-
2·According to the settlement in different depth, major compressive deformation develops in area nearby stabilized layer bottom.分层沉降观测结果表明，复合地基的主要压缩变形发生在加固区底部和下卧层顶部的一定范围。
-
3·Moreover, the uniaxial compressive deformation and damage of thenardite are different from other rocks during four deformation phases.在单轴压缩变形破坏过程中，具有与普通岩石试件不同的四阶段性特征。
-
4·The compressive deformation and strength of the concrete under different loading rates and lateral stresses are studied systematically in the paper.系统地探讨了有侧应力作用时，混凝土在不同加载速率下的受压变形和强度特性。
-
5·Zn-20%Al alloy specimens from both conventional ingots and stir cast ingots were compared and examined in terms of compressive deformation behaviour.对取自常规铸锭及搅动铸锭的试样的压缩特性进行了对比分析。
-
6·The results show that relationship between flow stress and strain rate is applied to hyperbolic sine equation in the hot compressive deformation of 6061 aluminum alloy;研究表明，6061铝合金热压缩塑性变形时的流变应力和应变速率之间的关系满足双曲正弦函数关系式；
-
7·Based on compressive deformation experiments of 21 pieces of sand-lime-AAC(SLAAC) masonry, this paper analyses their failure mechanism, and compares it with other masonries.通过对21个灰砂蒸压加气混凝土砌体试件受压变形性能的试验研究，分析了其受压破坏现象及机理，并与其他砌体进行了对比。
-
8·Also, the compressive properties of the fabrics were measured, and the pressure-deformation curve and some factors influencing the compressive deformation and recoverability were analyzed.对这些织物的压缩性能进行了测试，分析了压力—变形曲线和影响压缩变形和回复性能的因素。
-
9·The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
-
10·The microstructure of AZ61 magnesium alloy by strain-induced melt activation (SIMA) process was studied to reveal the effects of prior compressive deformation, isothermal temperature and holding time.研究了AZ61镁合金在应力诱发熔体激活法(SIMA)制备半固态坯料过程中预变形量、等温温度和保温时间对其组织的影响。