群发资讯网

返回主页
buckling deformation
失稳变形
常用释义
英式发音
美式发音
基本释义
  • 失稳变形;翘曲变形
例句
  • 1·Finite element method was applied to analyze the main factors affecting buckling deformation features and forming process.
    分析了影响管件屈曲变形特征和成形过程的主要因素。
  • 2·The infilled concrete benefit to restrain the buckling deformation of column webs, increase the strength and stiffness of the joint.
    内填混凝土有利于抑制柱腹板的屈曲变形,增加节点的承载力和刚度;
  • 3·The effect of shear displacement is not negligible in the buckling deformation of lattice structure in self-lifting tower crane body.
    剪切变形对自升式塔机桁架结构塔身弯曲变形的影响不容忽视。
  • 4·The upper bound for buckling failure of bedding slope is derived in the form of displacement by researching buckling deformation factors.
    通过对顺层边坡岩体结构屈曲和后屈曲变形因素的分析,提出了以位移形式表示的层状边坡溃屈破坏的上限值。
  • 5·By comparing the load of compression deformation and that of compression buckling deformation, the critical relative thickness is derived.
    通过比较压缩变形载荷与压缩失稳变形载荷的大小,导出了临界相对厚度。
  • 6·The large deflection buckling deformation of cold rolled strip acted on by residual stress is studied by using 3-Power spline function energy method.
    采用三次样条函数能量法,对冷轧轧后带材在纵向残余应力作用下的大挠度屈曲变形和临界失稳问题进行了研究。
  • 7·When the axis of rotation, because of the imbalance in the quality of centrifugal force between the utility, will the initiation of buckling deformation.
    当主光轴旋转时,因为失衡品质离心惯性力的效用,主光轴将萌生屈曲变型。
  • 8·It is found that the buckling strength of column-supported silos is mainly dependent on the height of the engaged column, which also affects the buckling deformation mode.
    研究表明,支柱伸入高度是影响仓壁柱承筒仓屈曲强度的主要因素,屈曲模态也与之密切相关。
  • 9·The criterion of energy transformation and conservation are used to derive the supplementary restraint condition of buckling deformation at the front of axial compression wave.
    由能量转换和守恒准则,导出压缩波阵面上的屈曲变形附加约束条件。
  • 10·Mold Flow Analysis, Temperature Analysis, Fill Analysis, Pressure Analysis, Buckling Deformation Analysis, Structure Review, Parting Line, Fixed Mold, Moving Mold, Water Circuit.
    模流分析、温度分析、填充分析、压力分析、翘曲变形分析、结构评审(初审、定型评审、终审)、分型线结构评审、定模结构评审、动模结构评审、水路分布评审。