brazing alloy
钎料
常用释义
英式发音
美式发音
基本释义
- 钎料，硬钎料；[机] 钎焊合金
例句
-
1·When joint is filled, a continuous rim of brazing alloy will be visible.连接处被充满后，就会看到焊接合金的边缘。
-
2·The temperature of the joint should be hot enough to melt the brazing alloy .连接部位的温度应该高到能够融化铜焊合金。
-
3·When joint is filled, a continuous run of solder or brazing alloy will be visible.在安装连接部件时，可以看到焊料和钎焊合金继续流动。
-
4·High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.采用高功率横流CO2激光扫描钎料合金与金刚石颗粒。
-
5·The theoretical rules among the high temperature performance of the brazing alloy, strain rate an…分析了钎料高温性能与应变速率、钴的变质剂作用等因素之间的理论规律。
-
6·The effect of copper on low boron low chromium nickel based brazing alloy was studied by experiments.本文研究了铜对低硼、低铬镍基钎料工艺性能的影响。
-
7·The results show that the melting point of brazing alloy is constant when the content of boron and silicon is reduced and the right amount of copper is added in.试验结果表明，在降低镍基钎料中硼、硅元素的同时加入适量的铜可以使钎料的熔点基本不变。
-
8·The product is used for brazing copper and copper alloy, easy processing, plastic, with good infiltration.用于做钎焊铜及铜合金，易加工，塑性好，具有良好的浸润性。
-
9·Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.由于钎焊是表现在温度与热短程，应变必须避免在钎焊和冷却这一合金。
-
10·Solder factory is mainly engaged in the production and marketing of products, aluminum copper alloy brazing flame or high-frequency brazing material.本厂主要从事焊锡制品的生产和销售，铝铜合金的火焰钎焊或者高频钎焊材料。