群发资讯网

返回主页
blowing tube
吹灰管
常用释义
英式发音
美式发音
基本释义
  • 吹灰管;排污管
例句
  • 1·Bend deformation often occurs on the blowing tube of the soot bl ow er during the test run, and directly affects the regular operation of the soot blower.
    在试运转时,吹灰器的吹灰管常常发生弯曲变形,直接影响吹灰器的正常运行。
  • 2·Sootblower mounts and guides shall not be attached to the tube shields. Blowing element shall be connected to the blower rotating tube using a flexible coupling.
    吹灰器安装架和导向导向装置不应与管道防磨片相连接。用挠性联轴器将吹灰器部件与吹灰器旋转管连接起来。
  • 3·The experiment result of the sintered metal tube shows that the uneven rate of axial blowing is lower than 10%, and the flow is steady.
    烧结金属筒实测结果显示,吹风径向不匀率小于10%,且气流稳定。
  • 4·Abraded by flying ash and blowing ash, the tube wall of low temperature superheater of HP boiler was thinned during operation.
    高压锅炉过热器在运行中受到飞灰、吹灰磨损,导致管壁减薄。
  • 5·How do I find of the clones: first, take two test tubes, put green pigment in vitro, and combine to clone human hair blowing into thee test tube.
    我发现怎么克隆人的:首先拿两个试管,在试管里放绿色素,再把要克隆的人的头发吹到试管里面。
  • 6·This seal is normally made by holding the torch flame stationary, blowing out a hole in the main glass body to match a second tube (hose connection in this example).
    这种密封通常由控股火炬火焰平稳,吹制出一个洞,在主体玻璃机构,以配合第二管(软管连接在这个例子中) 。
  • 7·It is then fed into thermostatic hot blast area and the axially blowing hot blast eliminates moisture inside the tube quickly while the roller irons the surface of the tube.
    一热风恒温区域,具有至少一藉以将一定温热风轴向吹向该纸管,使该纸管管内蒸发出的水份被热风迅速移除,及维持该纸管表面温度的热风产生器;
  • 8·The utility model relates to energy saving lighting tube manufacturing field, in particular to a novel tube opening blowing device used for blowing the energy saving lighting tube.
    本实用新型涉及节能灯管制造领域,特别是一种用于对节能灯管吹气的新型管口吹气装置。
  • 9·Use: After the rolling. The inner tube of a tyre will go through the complete auto production line. Such as cooling, blowing dry, cutting out, boring coving nozzle and spraying dust etc.
    内胎自动生产设备用途:内胎从压出机压出后,经过冷却、吹干、裁断、打孔贴嘴、喷粉、收取等全自动整套生产线。
  • 10·A sufficient flow of gas to produce clear difference of water level in the three manometer legs can be generated by blowing through the tube.
    当有足够的 气体流入时,即可发现三条管中之液体产生不同高度的变化。