bending rigidity
弯曲刚度
常用释义
英式发音
美式发音
基本释义
- 抗弯刚度；弯曲刚度
例句
-
1·The yarn bending rigidity in the fabric also concerns the weaving density and yarn twist factor etc ;织物中纱线的弯曲刚度还与织物紧度、纱线捻系数、织造和染整加工中的张力等因素有关；
-
2·Setting transverse diaphragm may remarkably increase the bending rigidity of the structure and improve its stress performance.增设箱梁横隔板可以增大这种结构的横向抗弯刚度，改善其受力性能。
-
3·The end product is six times lighter than steel, five to six times lower in density, two times harder and has13 times higher bending rigidity.最后，该产品比钢轻6倍，密度低5到6倍，更坚固2倍，抗弯刚度高13倍。
-
4·Thirdly, pretressing, concrete creep and bending rigidity of box girder are studied to discuss their impacts on the deformation of girder.再次，讨论了预应力、混凝土徐变、箱梁抗弯刚度等对桥梁结构下挠的影响。
-
5·This paper by means of different locations inertia moment of different directions and bending of the drill, analyses its bending rigidity.本文利用钻头不同位置不同方向的惯性矩和挠曲对其弯曲刚性进行解析。
-
6·The compression strength and the bending rigidity of the refractory materials made from nano-clay modified phenolic resin anchoring agent were both improved.采用这种结合剂所制得的无定形捣打料和铝碳砖的耐压强度以及抗弯刚度均得到较大提高。
-
7·The Web steel truss beam is simulated with three-dimensional beam element, and the equivalent bending rigidity of the beam could be obtained by bending test.模型中，桁架柱采用三维梁单元模拟，其等效弯曲刚度利用弯曲试验直接获得。
-
8·Results: Compared to S rats, elastic ultimate load (EUL), the ultimate load(UL) and bending rigidity coefficient (BRC) of G1 rats ( P结果：与S组大鼠比较：G1组弹性载荷、最大载荷和刚性系数显著恢复（P <0 .0 5 ） ；
-
9·In bending failure test pieces, after crack chemistry grouting, the bending rigidity slightly has increased, but the limit load-carrying capacity has no obvious variety.正截面试件，裂缝灌浆后刚度略有提高，但极限承载力无明显变化。
-
10·Followly, the bending rigidity and transverse shearing rigidity of one-way bamboo-stripe laminates applied to shipbuilding has been measured practically with this method.用该方法实测了造船工业用的单向竹蔑积成胶合板的弯曲刚度与横向剪切刚度。