群发资讯网

返回主页
angular misalignment
角度错位:指两个物体或部件之间的角度不一致
常用释义
英式发音
美式发音
基本释义
  • 角度错位:指两个物体或部件之间的角度不一致,导致它们不能正确对齐的现象。
例句
  • 1·A theory model considering the isotropy roughness and static stator angular misalignment of dry gas seal was given.
    建立了考虑低速干气密封端面各向同性粗糙度和静环静态角偏差的理论模型。
  • 2·Finally, the nonlinear dynamics characteristics of rotor system with angular misalignment are analyzed by the numerical method.
    最后,采用数值方法分析了具有转角不对中故障转子系统的非线性动力学特性。
  • 3·There are three types of shaft misalignment, namely in terms of parallel misalignment, angular misalignment and shaft end-play.
    轴的偏差有三种,分别是径向偏差、角向偏差和轴向偏差。
  • 4·According to this model, the parallel misalignment and angular misalignment can be calculated so long as light spot coordinate of PSD at two discretionary angles is measured.
    据此模型,只要测量出任意两个角度时光斑在PS D上的坐标,即可求出两轴的径向偏差和角度偏差。
  • 5·The free angular movement or misalignment between the two levers shall not exceed 10mm.
    两个手柄的比对运动后,其位移量不超过10毫米。
  • 6·Axial motion and misalignment (radial and angular offset) between the encoder shaft and the drive shaft are compensated by the coupling.
    轴向运动和编码器之间的轴和驱动轴偏差(径向和角向偏移)进行补偿的耦合。