adhesion agent
胶粘剂
常用释义
英式发音
美式发音
基本释义
- 粘接剂：一种用于增强材料之间粘接力的化学物质或物质组合。它可以提高材料的附着性和粘合性能。
例句
-
1·The melt adhesive used as the adhesion agent is solid gum and comparatively environment-friendly.作为粘结剂的热熔胶为固体胶，比较环保。
-
2·Results the adhesion agent has uniformity of drugs, stabilization and adhesion and has synergy with the treatment of drugs.结果该粘附剂药物分散均匀，制剂稳定，有较强的粘附性，能协同药物发挥治疗作用。
-
3·All of the performances of said adhesion agent surpass that of the ordinary neoprene adhesion agents but the productive cost is lower.这种胶粘剂的性能均超过普通氯丁胶粘剂，生产成本低。
-
4·Inadequate bonding strength of adhesion agent was traditionally considered to cause project quality problems, but the traditional bonding mode is only on the basis of experience.在外墙外保温的工程质量问题中，传统认为是黏结强度不够的原因，而传统的黏结方式也只是根据经验而定的。
-
5·The chitosan as an antibacterial agent and the heparin as an anti-adhesion agent were successfully deposited onto the aminolyzed PET by the layer-by-layer self assembly technology.本文围绕阻止生物膜形成这一主线，并采用层层静电自组装技术，构建了以下抗菌涂层。
-
6·The reclamation of waste polystyrene is summarized, The use as fire retardant, ion exchange resin, latex paint, building adhesion agent, and pyrolysis fuel oil are introduced in detail.归纳了以废旧聚苯乙烯为原料溴化作阻燃剂，磺化用作离子交换树脂，制备乳胶漆，建筑用胶粘剂，裂解成燃料油等回收利用情况。
-
7·To reduce viscosity of raw starch size and enhance the adhesion ability to pure cotton yarn, starch reducing viscosity agent SPU was developed by three agents and suitable ratio.为降低原淀粉浆液的粘度、提高淀粉浆液对纯棉纱的粘附力，利用三种助剂的协同作用，选用适当的配比研制开发了淀粉降粘剂SPU。
-
8·The surface was smooth, the problem of adhesion by borax was solved. The results showed that the content of adhesive agent has great influence to the surface status of paste.试验结果表明：粘结剂的含量对膏剂表面状态有很大影响，调整还原剂和硼砂的比例或者降低硼砂含量可以避免硼砂粘结。
-
9·The adhesion between asphalt added this anti-stripping agent and aggregates did not decrease after film heating. However, it remained at the level of grade 5 or 5-.经薄膜加热处理后，掺加该抗剥落剂的沥青与集料之间的粘附性没有降低，仍可达到5 级或5级。
-
10·The effect of monomer ratio, the kind and concentration of keying agent on adhesion strength is also studied.研究了单体配比、增粘剂种类、增粘剂用量对剥离强度的影响。