abrasiveness
磨蚀
常用释义
英音[ əˈbreɪsɪvnəs ]
美音[ əˈbreɪsɪvnəs ]
基本释义
- n. 研磨；磨蚀；[机] 磨损性
例句
-
1·The abrasiveness of white cast iron with low alloy content was studied through abrasion test.通过磨损试验研究了变形对低合金耐磨铸铁耐磨性的影响。
-
2·And process methods for ensuring corrosion resistance, abrasiveness of anodized film are pointed out.指出了为保证氧化膜的耐蚀性、耐磨性而采取的工艺措施。
-
3·The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.这种加强的负作用通常是抗冲击强度降低及磨损性增加。
-
4·The research results show that the steel fiber can improve remarkably the strength of the phosphate cement mortar, reduce its shrinkage and enhance its abrasiveness.研究结果表明，掺入钢纤维可显著提高磷酸镁水泥砂浆的强度，降低砂浆的收缩率及提高砂浆的耐磨性能；
-
5·Based on diverse working condition featured by dust, abrasiveness, high temperature and strong magnetic field, two or three layers of insulation is considered when designing.根据电解车间内多粉尘、磨损性、高温度、强磁场的恶劣工作条件，有针对性地设计了两层至三层绝缘层。
-
6·Careful consideration during the design phase to ash slurry properties, such as abrasiveness and particle size, will lead to more efficient and longer-lasting sluiceways and pipes.设计阶段应仔细考虑灰浆的性质，如磨蚀性和粒度-目的在于使得溜槽和管道更有经久有效利用。
-
7·As with conventional bucket, the taper bucket is manufactured from high quality quench and tempered steels allowing for high strength, as well as high abrasiveness in required areas.象传统铲斗一样，锥形铲斗也在需要的部位使用高质量的，既具有高强度又耐腐蚀的调质钢。
-
8·The slagging, fouling and abrasiveness performances of co-firing low-temperature pyrolyzed biomass with coal depend on the ash content, the ash component of them and their blending rate, etc.热解生物质与煤共燃时的结渣、积灰和磨损特性取决于热解生物质灰分含量、灰成分，煤的灰分含量、灰成分以及混合比例等因素。
同义词
n.
研磨；磨蚀；[机]磨损性
同根词
词根：
abrase
abrasive
adj
粗糙的；有研磨作用的；伤人感情的
abrasion
n
磨损；磨耗；擦伤
abrasive
n
研磨料
abrader
n
磨石；研磨器
abrade
vi
经受磨损；受擦伤
abrade
vt
擦伤；磨损
abrase
vt
磨损；擦伤（等于abrade）