TITANIUM ALLOYS

钛合金

常用释义

钛合金

扩展信息

钛合金

钛合金（Titanium Alloys）：钛合金的硬度与韧性都与合金钢不相上下，但比重大约只有60%，在相同重量的情况下可以比钢甲 …

例句

The titania-based composite nano structures can be fabricated on the surface of titanium or titanium alloys through an anodization method.

通过阳极氧化方法可以在纯钛或钛合金表面形成氧化钛基复合纳米结构。

It is considered a new way of a lower cost to produce high performance powder metallurgy titanium alloys.

这为低成本高性能粉末冶金钛合金的制备探索了一条新的途径。

CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF IRON CONTENT. MOLECULAR ABSORPTION SPECTROMETRY METHOD.

钛及钛合金的化学分析 .铁含量测定 .分子汲收光谱测定法

Current status of application of titanium alloys is briefly reviewed, and possible low cost manufacturing technology is analyzed.

简要阐述了铁合金的应用现状，分析了降低铁合金成本的可能性途径。

The primary purpose of this research is focused in vacuum brazing SP-700 high-strength titanium alloys using various Ti-based braze alloys.

本研究主要的目标在于以多种钛基填料真空硬焊接合 SP-700 高强度钛合金。

But the thighbone made up of the titanium alloys, made by machine tool processing. . .

但是，以钛合金为材料，机床加工得到的股骨对儿童不适用。

The influence of microstructure, chemical composition, heat treatment and texture in titanium alloys has been reviewed in this article.

本文介绍显微组织，合金成分，热处理和织构等对钛合金断裂韧性的影响。

However, the titanium alloys have low hardness, poor wear resistance which limits their more applications.

但是钛合金的硬度低、耐磨性能差，这一缺点极大的限制了它的进一步广泛应用。

An infrared method for the determination of carbon content in titanium alloys was developed.

应用高频红外碳硫仪测定钛合金中碳的含量。

CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF OXYGEN CONTENT.

钛及钛合金的化学分析 .氧含量的测定

The results provide an experimental basis for diamond roller dressing of SG wheels in the grinding of titanium alloys.

实验及分析结果为金刚石滚轮修整 SG 砂轮磨削钛合金的修整工艺提供了依据。

Stainless steel itself was altered to create vanadium, Vitallium, and now titanium alloys.

不锈钢本身也被调整为钒、铝以及现在的钛合金。

Thermohydrogen treatment (THT) is a new technology which has already been applied extensively in processing of titanium alloys.

热氢处理是一种新的钛合金加工技术，已广泛应用于钛合金中。

Approval testing of welders - Fusion welding - Part 5 : titanium and titanium alloys, zirconium and zirconium alloys.

焊工的验收试验 .熔焊 .第5 部分：钛和钛合金 .锆和锆合金

The characterization of structure strengthening of different shot peening process for TC4-DT titanium alloys was studied.

研究了喷丸强化对 TC4-DT 钛合金材料组织的强化效果；

General situations of study and application for cryogenic titanium alloys are introduced in the paper.

介绍了近年来前苏联、美国、中国低温钛合金的研究和应用现状。

The progress of COMBI which is widely used in the titanium alloys research is summarized.

综述了组合材料芯片技术在钛合金研究中应用的新进展。

TUBES OF CIRCULAR SECTION IN TITANIUM AND TITANIUM ALLOYS.

钛和钛合金圆管

Finally the future development trends of ultra-high strength titanium alloys were proposed.

最后提出了超高强度钛合金的发展方向。

When grinding titanium alloys with green silicon carbide wheel, the wheel achesion is serious and the grinding ratio is very low.

磨削钛合金时砂轮磨损严重，磨削比很低。

This is more than twice the strength of conventional titanium alloys.

这一点高于传统的锑合金两倍的强度。

Development Situation of the Overseas Titanium Alloys Used for Aircraft Engine

国外航空发动机用钛合金的发展现状

更新时间：2025-07-13 14:44